Posts

Showing posts with the label 10-meter band

Simple Ham Radio Antennas: A 5/8 wavelength vertical ground plane. Post #272

Image
According to Edward M. Noll (W3FQJ), "The 5/8-wavelength vertical is a preferred length for the best low angle radiation."  For the higher HF bands (20 through 10 meters), this antenna is easily assembled and requires a small quantity of wire, some ceramic insulators, a suitable mast, 50-ohm feed line or 450-ohm feed line, a simple ground radial system, and a sturdy antenna matchbox or ATU .  Multiband use between 20 and 10 meters is possible with 450-ohm ladder line , ATU, and a balun, while good single band use can be obtained with 50-ohm coaxial cable and an inline or base antenna "tuner". So, let's build a simple 5/8 wavelength vertical for the 10 meter amateur radio band, centering on 28.4 MHz .  This frequency is at the mid-point of the SSB allocation for Technician Class licensees.  The antenna was built at my new home in the Puna District on 18 April 2014. MATERIALS: Using the general formula, 585/f (MHz)=L (ft), our vertical element will measur

Simple Ham Radio Antennas: The 10 meter 1/2 wavelength sloper. Post #262

Image
The sloping 1/2 wavelength dipole is one of my favorite antennas.  "Slopers" are good antennas for restricted space areas.  They are simple to build, inexpensive, and exhibit some directivity in the your chosen direction. According to VK6YSF, VE2DPE, and other amateur radio operators, a properly designed 1/2 wavelength sloper radiates energy at low angles relative to the horizon with vertical polarization.  Slopers don't require a ground radial system and can be fed with a good grade of 50 ohm coaxial cable.  A sloper antenna only requires one tall support (tree, mast, edge of a roof, etc.) and occupies less space that a 1/2 wavelength horizontal dipole. So, let's build one of these simple, effective antennas for the 10 meter band , centering on 28.4 MHz --right in the middle of the techncian class phone band. MATERIALS: One tall support.  In my case, I used a 33-ft/10.06 meter MFJ telescoping fiberglass mast.. One 5-ft/1.52 meter wooden stake to support