Posts

Showing posts with the label MFJ Enterprises

Simple Ham Radio Antennas. The Open-Wire Dipole (Doublet). Post #293

I'm still in the process of restoring my "antenna farm" after the passing of Tropical Storm Iselle on 07-08 August 2014.  I lost a few trees on my Orchidland Estates property, most of which were supporting several HF wire antennas.  I salvaged most of the wire and the 450 ohm feedline from the storm.  While I cleaned up the mess, I erected a simple multiband vertical antenna using a tall Norfolk Pine Tree as an antenna support. Next on the list is the restoration of my approximately 134-ft/40.85 meters  center-fed horizontal dipole.  The antenna is fed with 450 ohm ladder line which goes into a W9INN 4:1 balun and then via a short length of RG-8X coax into a MFJ 941E Versa Tuner II.  This feed arrangement allows multiband coverage from 3.500 MHz through 29.000 MHz. Although the antenna requires two tall supports (trees or masts), construction of the antenna is simple and the dipole doesn't require a ground radial system. Using the general formula, 468/f(

Simple Ham Radio Antennas: An 80-10 meter inverted vee dipole. Post #263

Image
A few days ago I read a fascinating antenna article by Cecil Moore (W5DXP) on the http://www.eham.net website.  Cecil described what he called a " Multi-Band 33-ft dipole" that works on 20, 17, 15, and 10 meters without an antenna "tuner" (i.e. transmatch ).  The secret to this outstanding antenna was the use of 450 ohm ladder line in conjunction with a series of switches and relays that selected the proper length of ladder line used to feed the antenna.  Depending on the band of use, Cecil could insert and remove sections of ladder line with his relay/switch system so that swr across his chosen band remained low.  By carefully selecting which section of feed line to add or subtract, he got a decent performing antenna without having to resort to a transmatch or "tuner." Cecil's idea got me thinking of ways to improve the dipoles I'm using at my new home site.  Although his idea has a lot of merit, I felt the need to build something a bit simpl